PTFE Spaghetti Tubing High Temperature 1.5mm ID x 1.8 OD Teflon Tube
PTFE (Teflon) spaghetti tubing with a 1.5 mm inner diameter (ID) and 1.8 mm outer diameter (OD) is a high-temperature, chemically resistant material widely used for electrical insulation, fluid transfer, and 3D printing applications.
Key Properties
Exceptional chemical resistance
PTFE is nearly inert to all known solvents, acids, alkalies, and salts.
High thermal stability
It has a wide continuous operating temperature range, typically from -65°C to +260°C (-85°F to 500°F).
Superior electrical insulation
It offers high dielectric strength, making it ideal for electrical and electronic applications.
Low friction
It has the lowest coefficient of friction of any known solid material, which facilitates easy installation and reduces wear and tear in moving parts.
Flame-resistant
It is self-extinguishing and meets UL VW-1 flame rating standards.
Available in various wall thicknesses
Options include light wall, thin wall, standard wall, and heavy wall to suit different application needs.
Common Applications
PTFE spaghetti tubing is a versatile solution used across numerous industries:
Aerospace and Defense
For wire harness insulation in high-temperature zones and hydraulic systems.
01
Electronics
Insulating leads and terminals in circuit boards and protecting fiber optic cables in telecommunications.
02
Medical Devices
Used as a chemical-resistant covering for sensitive instrumentation and in catheter assemblies due to its biocompatibility and smooth surface.
03
Chemical Processing
For safe transfer and handling of corrosive liquids and gases without contamination.
04
Automotive
Used in fuel and brake systems due to its resistance to various fuels and high temperatures under the hood.
05
Payment&Shipping
|
Packing |
Carton / Pallet / Wooden Box |
|
Shipping method |
By express.By air,By Sea |
|
FOB Port |
Shenzhen |
|
Production time |
Depends on your qty(3~15 days) |
|
OEM/ODM |
Available |
|
Payment |
TT/Ali pay/Ali Assurance |
AWG Sizing and Wall Thickness
The most common way to specify smaller PTFE spaghetti tubing sizes is by AWG, which corresponds to specific inner diameters (ID) and nominal wall thicknesses. The standard wall thicknesses include Light Wall, Thin Wall, Standard Wall, and Heavy Wall.
| AWG Size | Nominal ID (Inches) | Light Wall (Nominal Inches) | Thin Wall (Nominal Inches) | Standard Wall (Nominal Inches) |
Heavy Wall (Nominal Inches) |
| 24 | 0.022 | 0.006 | 0.010 | 0.012 | 0.016 |
| 20 | 0.034 | 0.006 | 0.012 | 0.016 | 0.018 |
| 18 | 0.042 | 0.006 | 0.012 | 0.016 |
0.020 |
| 16 | 0.053 | 0.006 | 0.012 | 0.016 |
0.020 |
| 12 | 0.085 | 0.008 | 0.012 | 0.016 |
0.020 |
| 8 | 0.133 | 0.008 | 0.015 | 0.020 | 0.030 |
| 0 | 0.330 | 0.012 | 0.015 | 0.020 | N/A |
